================================================================================
'setup.exe' MSI Caller - Filerelease: 201.116.1101.2 - Copyright (C) S AG 2008
======= Timestamp logfile begin: 2007-01-03,  14:45:39
 LoggingLevel: 11
Path of .msi file: F:\sw\simnetpc\scs\setup\
 Test and install MSI:
    Found MSI folder: C:\WINDOWS\system32\
    MSI Version required: 3.1.4000.1823  /  MSI Version installed: 3.1.4001.5512
    DCOM verification.
    DCOM settings O.K.
 End of TestMSI.
    TestRegistryRights: Registry write access OK in key 'Software\Siemens\Shared Tools'
    TestRegistryRights: Registry write access OK in key 'Software\Siemens\Shared Tools\CompSetup'
    Clientname from registry: SIMATIC NET PC SOFTWARE
    Lnge Clientname: 23
    Setup language from registry: B
 SetupLanguage chosen: 1033
 No transform necessary. Language: B
    Test for Mutex...   [14:45:39]
	No MSI active (no Mutex existing)
Stream out from: F:\sw\simnetpc\scs\setup\simatic scs.msi
Stream out to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC03CDD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
Stream out: Steuerdatei
Stream return: 0
OS type: WNT: WXP
OS edition: PED
Operating systems allowed due to ini: Win2000&>
    WXP found.
 Test and install ISScript:
    Yes. 1. ISscript critical registry value existing: C:\ARCHIV~1\ARCHIV~1\INSTAL~1\Driver\11\INTEL3~1\IDriver2.exe
    Yes. 2. ISscript critical registry value existing: C:\ARCHIV~1\ARCHIV~1\INSTAL~1\Driver\11\INTEL3~1\IDriverT.exe
    Yes. IS path from registry exists: C:\Archivos de programa\Archivos comunes\InstallShield\Driver\11\Intel 32\
    C:\Archivos de programa\Archivos comunes\InstallShield\Driver\11\Intel 32\IDriver2.exe: vers. required: 11.0.0.28844  / vers. installed: 11.0.0.28844
    C:\Archivos de programa\Archivos comunes\InstallShield\Driver\11\Intel 32\IDriverT.exe: vers. required:  11.0.0.28844  / vers. installed: 11.0.0.28844
    ISscript 11 installed in correct version.
	D e i n s t a l l a t i o n
    Test for Mutex...   [14:45:40]
	No MSI active (no Mutex existing)
 
 Deinstall section:
    (Determine Mainkey: No HKClassesR key..)
    (Determine Mainkey: No HKCUser key..)
    Full release you want to install: V07.01.01.0_01.26.0.01
    MsiQueryProductStateFct: Componentsetup is NOT installed for GUID: {CCC03CDD-3A54-11D6-92A8-00A0245B3AC6}
    IsInstalled: 0, MsiCompInstalled: 0
 Component not installed. No deinstall necessary.
 
======= Timestamp before install execution: 2007-01-03,  14:45:40
	I n s t a l l a t i o n
    Test for Mutex...   [14:45:40]
	No MSI active (no Mutex existing)
 
 Install section:
    MsiQueryProductStateFct: Componentsetup is NOT installed for GUID: {CCC03CDD-3A54-11D6-92A8-00A0245B3AC6}
    IsInstalled: 0, MsiCompInstalled: 0
    Component not (already and/or no longer) installed: Will install it...
    Client entry set:SIMATIC NET PC SOFTWARE
 Launch installation:  [14:45:40]
    TRACE: Call_msiexec:  MSI-Folder= C:\WINDOWS\system32\
    TRACE: OS XP:  use CreateProcess

Start CreateProcess:  [14:45:40]
    called line: C:\WINDOWS\system32\msiexec.exe /i "F:\sw\simnetpc\scs\setup\simatic scs.msi" /qb-! /L*V "C:\WINDOWS\SETUP\LOGFILES\SCS_LOG_MSI_INTERN.TXT"  ALLUSERS=1 ADS_CALLED_EXTERNAL=1
    maximum waiting time= 1 minutes

CA: _ExitIfStandAlone   [2007-01-03 14:45:42]

Ext: 1 - Nested:  - Deinst: 
 
--------------------------------------------------------------------------------
 
***  SETUP LOGFILE *** - Shared Component Setup (MSI V3.1/IS V11)

Filename:      SCS_LOG.TXT
Install start: 1-3-2007, 14:45:42

Frame Name:       Component_Masterframe
Frame Version:    V02.01.01.16_11.00.00.02
Frame Date:       2008-03-11


CA: IniC_StreamOutIniFiles  START 14:45:42
    -- MSI Neuinstallation angenommen. REINSTALL: 0
    Ini file will be: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC03CDD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    Commandline at first: 
     
CA: IniC_StreamOutIniFiles  END 14:45:43

CA: _StreamOutSteuerdatei  BEGIN  [14:45:43]

StreamOut files from 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC03CDD-3A54-11D6-92A8-00A0245B3AC6}\'..
Streamed out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC03CDD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: _StreamOutSteuerdatei  END  [14:45:43]

CA: Comp_Initialize  START 14:45:43
    The SETUP is started from: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC03CDD-3A54-11D6-92A8-00A0245B3AC6}\
     
Commandline parameter:  INTERPRETED: 
    Trace: LoggingMax activated.
 
Official name of this Shared Component: SIMATIC SCS
Internal name: WinCC ACE
Release: K07.01.01.00_01.26.00.01
Version: 7.1
Comparing with data of 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC03CDD-3A54-11D6-92A8-00A0245B3AC6}\version.ini' .
No MainProd found.

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: B

    Change Setup Language?
    The language is up to date.
CA: Comp_Initialize  END 14:45:43

CA: _ADS_SetDirs  BEGIN  [14:45:43]
    TRACE:  STARTMENU_PLACE: AUTO
 Set classic startmenue= C:\Documents and Settings\All Users\Men Inicio\
CA: _ADS_SetDirs  END  [14:45:43]

CA: Comp_BeforeDataMove  START 14:45:46

Test Operating System
    Found Operating System: 
       VersionNT = 501
       ServicePackLevel = 3
       NTProductType = 1
    Allowable OS: Win2000&>
    OperatingSystem condition string to check: ((VersionNT>=500))
    Condition is True: Installation is allowed.
User has Administrator rights, O.K.

Main Path and Common Path determination:

Common directory
    Common Path exists: C:\Siemens\Common
    Common path was set to: C:\Siemens\Common\
    Base Dir is Common Path: C:\Siemens\Common
    Dirs: Dont use MAIN Path  !
    REINSTALL: 0
    INSTALLDIR was set to: C:\Siemens\Common\
     
     

--- Test if Shared Component setup is new installation, overinstallation, update, install for new client:
    Test 8x2 Release ...
    
How to install component:
    New installation! No 'CLIENTS' key has existed; OK.

Deinstall Key: Comp_Def
StartAppl
 
    Shall start CCAgent.EXE in C:\Siemens\Common\ACE\bin\
    ChangeDirectory to C:\Siemens\Common\ACE\bin for CCAgent.EXE in C:\Siemens\Common\ACE\bin\
    Could not find application CCAgent.EXE in C:\Siemens\Common\ACE\bin\
    Perhaps product is not installed!
 
    Shall start CCEClient.EXE in C:\Siemens\Common\ACE\bin\
    ChangeDirectory to C:\Siemens\Common\ACE\bin for CCEClient.EXE in C:\Siemens\Common\ACE\bin\
    Could not find application CCEClient.EXE in C:\Siemens\Common\ACE\bin\
    Perhaps product is not installed!
 
    Shall start CCEServer.EXE in C:\Siemens\Common\ACE\bin\
    ChangeDirectory to C:\Siemens\Common\ACE\bin for CCEServer.EXE in C:\Siemens\Common\ACE\bin\
    Could not find application CCEServer.EXE in C:\Siemens\Common\ACE\bin\
    Perhaps product is not installed!
 
    Shall start RedundancyControl.exe in C:\Siemens\Common\ACE\bin\
    ChangeDirectory to C:\Siemens\Common\ACE\bin for RedundancyControl.exe in C:\Siemens\Common\ACE\bin\
    Could not find application RedundancyControl.exe in C:\Siemens\Common\ACE\bin\
    Perhaps product is not installed!
 
    Shall start RedundancyState.exe in C:\Siemens\Common\ACE\bin\
    ChangeDirectory to C:\Siemens\Common\ACE\bin for RedundancyState.exe in C:\Siemens\Common\ACE\bin\
    Could not find application RedundancyState.exe in C:\Siemens\Common\ACE\bin\
    Perhaps product is not installed!
 
    Shall start SCSMX.exe in C:\Siemens\Common\ACE\bin\
    ChangeDirectory to C:\Siemens\Common\ACE\bin for SCSMX.exe in C:\Siemens\Common\ACE\bin\
    Could not find application SCSMX.exe in C:\Siemens\Common\ACE\bin\
    Perhaps product is not installed!
 
END  StartAppl
CA: Comp_BeforeDataMove  END 14:45:47

CA: _ads_copyfiles  BEGIN 14:45:53


 CopyLockedFiles (RenameFilesAtReboot): Stream out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC03CDD-3A54-11D6-92A8-00A0245B3AC6}\CopyFiles.ini
	 CopyLockedFiles (RenameFilesAtReboot): No files listed.


CA: _ads_copyfiles  END 14:45:53

Create Shortcuts...
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC03CDD-3A54-11D6-92A8-00A0245B3AC6}
  Streamout MBShortcuts to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC03CDD-3A54-11D6-92A8-00A0245B3AC6}\MBShortcuts.ini
  Startmenu language tested for shortcuts: 3082
  Startmenu language used for shortcuts: 1033
End Shortcuts


CA: _ADS_WriteRegistryValues  BEGIN  [14:45:53]
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC03CDD-3A54-11D6-92A8-00A0245B3AC6}
    Streamout MBRegEntries.ini to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC03CDD-3A54-11D6-92A8-00A0245B3AC6}\MBRegEntries.ini
CA: _ADS_WriteRegistryValues  END  [14:45:53]

CA: Comp_AfterDataMove  START 14:45:53
    Environment settings:
    Add NT Path: C:\Siemens\Common\ACE\Bin
        Path found in registry: C:\Siemens\Common\ACE\Bin

Selfregister Files by Regserver:
    Waiting on Regsvr: 

start CreateProcess  [14:45:53]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\DistConf.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:45:56]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCRedundancyNotifyServer.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:45:58]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCAlgIAlarmDataMxServer.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:00]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCAlarmParseMoniker.dll" Result: 0
    DeinstallLogfileB1

start CreateProcess  [14:46:02]
    Install "C:\Siemens\Common\ACE\Bin\CCAlgIAlarmDataProxyServer.exe" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:04]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCAlgIAlarmDataStubServer.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:06]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCTlgIArchiveMxServer.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:08]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCTlgParseMoniker.dll" Result: 0
    DeinstallLogfileB1

start CreateProcess  [14:46:10]
    Install "C:\Siemens\Common\ACE\Bin\CCTlgArchiveClient.exe" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:12]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCTxtITextMxServer.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:14]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCTxtParseMoniker.dll" Result: 0
    DeinstallLogfileB1

start CreateProcess  [14:46:16]
    Install "C:\Siemens\Common\ACE\Bin\CCTxtProxy.exe" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:18]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCUaIUaBasicMx.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:20]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCUaParseMoniker.dll" Result: 0
    DeinstallLogfileB1

start CreateProcess  [14:46:22]
    Install "C:\Siemens\Common\ACE\Bin\CCUAIUABasicProxyServer.exe" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:24]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCDmParseMoniker.dll" Result: 0
    DeinstallLogfileB1

start CreateProcess  [14:46:26]
    Install "C:\Siemens\Common\ACE\Bin\CCDmIVarProxyServer.exe" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:28]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCDmIVarStubServer.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:30]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCShellExtention.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:32]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCGenericProxy.dll" Result: 0
    Waiting on Regsvr: 

start CreateProcess  [14:46:34]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCGenericStub.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:36]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCTlgStubServer.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:38]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCTXTITextStubServer.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:40]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\WINDOWS\system32\melbreg.dll" Result: 0
    Waiting on Regsvr: 

start CreateProcess  [14:46:42]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\CCINSInfoBrowser.ocx" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:44]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSTlgArchiveMergerX.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:46]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSWebPALProxyStubX.dll" Result: 0
    DeinstallLogfileB1
    ChangeWorkingDirectory to: C:\Siemens\Common\ACE\Bin

start CreateProcess  [14:46:48]
    Install "C:\Siemens\Common\ACE\Bin\SCSDialogX.exe" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:50]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSIRTCommandMergerX.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:52]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSIRTCommandMuxX.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:54]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSIAlarmDataMergerX.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:56]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSIEpeEventMergerX.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:46:58]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSIEpeEventMuxX.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:47:00]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSIEvent2MergerX.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:47:02]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSIEvent2MuxX.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:47:04]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSIEventDHX.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:47:06]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSNsInfo2MergerX.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:47:08]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSNsInfo2MuxX.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:47:10]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSIRtCommandDHX.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:47:12]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSIArchiveDHX.dll" Result: 0
    DeinstallLogfileB1
    Waiting on Regsvr: 

start CreateProcess  [14:47:14]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSIVar2DHX.dll" Result: 0
    DeinstallLogfileB1

start CreateProcess  [14:47:16]
    Install "C:\Siemens\Common\ACE\Bin\CCUAIUABasicStubServer.exe" Result: 0
    DeinstallLogfileB1
    ChangeWorkingDirectory to: C:\Siemens\Common\ACE\Bin
    Waiting on Regsvr: 

start CreateProcess  [14:47:18]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSIVarMuxX.dll" Result: 0
    DeinstallLogfileB1
    ChangeWorkingDirectory to: C:\Siemens\Common\ACE\Bin
    Waiting on Regsvr: 

start CreateProcess  [14:47:20]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSIVarMergerX.dll" Result: 0
    DeinstallLogfileB1
    ChangeWorkingDirectory to: C:\Siemens\Common\ACE\Bin
    Waiting on Regsvr: 

start CreateProcess  [14:47:22]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSICCProfileStorageMergerX.dll" Result: 0
    DeinstallLogfileB1
    ChangeWorkingDirectory to: C:\Siemens\Common\ACE\Bin
    Waiting on Regsvr: 

start CreateProcess  [14:47:24]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\Siemens\Common\ACE\Bin\SCSICCProfileStorageMuxX.dll" Result: 0
    DeinstallLogfileB1


Correct Path in Registry
    HKLM: \SOFTWARE\Siemens\DCS\ACE, Inst_Path, C:\Siemens\Common\ACE\Bin

StartApplAfter
 
    Shall start CCAgent.EXE in C:\Siemens\Common\ACE\bin\
    ChangeDirectory to C:\Siemens\Common\ACE\bin for CCAgent.EXE in C:\Siemens\Common\ACE\bin\
    Start Application: C:\Siemens\Common\ACE\bin\CCAgent.exe

start CreateProcess  [14:47:26]
    Successfully started C:\Siemens\Common\ACE\bin\CCAgent.exe /Service, Returnvalue: 0
 
    Shall start regsvr32.exe in C:\WINDOWS\system32\
    ChangeDirectory to C:\Siemens\Common\ACE\bin for regsvr32.exe in C:\WINDOWS\system32\
    Start Application: C:\WINDOWS\system32\regsvr32.exe

start CreateProcess  [14:47:29]
    Successfully started C:\WINDOWS\system32\regsvr32.exe /s /n /i:"ACE-Setup" CCSecurityMgr.dll, Returnvalue: 0
 
    Shall start regsvr32.exe in C:\WINDOWS\system32\
    ChangeDirectory to C:\Siemens\Common\ACE\bin for regsvr32.exe in C:\WINDOWS\system32\
    Start Application: C:\WINDOWS\system32\regsvr32.exe

start CreateProcess  [14:47:32]
    Successfully started C:\WINDOWS\system32\regsvr32.exe /s /n /i CCRemoteServer.dll, Returnvalue: 0
 
    Shall start RegTlb32.exe in C:\Siemens\Common\ACE\interfaces\
    ChangeDirectory to C:\Siemens\Common\ACE\interfaces for RegTlb32.exe in C:\Siemens\Common\ACE\interfaces\
    Start Application: C:\Siemens\Common\ACE\interfaces\RegTlb32.exe

start CreateProcess  [14:47:34]
    Successfully started C:\Siemens\Common\ACE\interfaces\RegTlb32.exe /s CCGeneric.tlb, Returnvalue: 0
 
    Shall start RegTlb32.exe in C:\Siemens\Common\ACE\interfaces\
    ChangeDirectory to C:\Siemens\Common\ACE\interfaces for RegTlb32.exe in C:\Siemens\Common\ACE\interfaces\
    Start Application: C:\Siemens\Common\ACE\interfaces\RegTlb32.exe

start CreateProcess  [14:47:36]
    Successfully started C:\Siemens\Common\ACE\interfaces\RegTlb32.exe /s SCSMuxAdminX.tlb, Returnvalue: 0
 
    Shall start RegTlb32.exe in C:\Siemens\Common\ACE\interfaces\
    ChangeDirectory to C:\Siemens\Common\ACE\interfaces for RegTlb32.exe in C:\Siemens\Common\ACE\interfaces\
    Start Application: C:\Siemens\Common\ACE\interfaces\RegTlb32.exe

start CreateProcess  [14:47:38]
    Successfully started C:\Siemens\Common\ACE\interfaces\RegTlb32.exe /s SCSISvcPublisherX.tlb, Returnvalue: 0
 
    Shall start RegTlb32.exe in C:\Siemens\Common\ACE\interfaces\
    ChangeDirectory to C:\Siemens\Common\ACE\interfaces for RegTlb32.exe in C:\Siemens\Common\ACE\interfaces\
    Start Application: C:\Siemens\Common\ACE\interfaces\RegTlb32.exe

start CreateProcess  [14:47:40]
    Successfully started C:\Siemens\Common\ACE\interfaces\RegTlb32.exe /s ICCProfileStorage.tlb, Returnvalue: 0
 
END  StartApplAfter


    Add Client:                     SIMATIC NET PC SOFTWARE
    Write Version:                  7.1
    Write Release:                  K07.01.01.00_01.26.00.01
    Display Name                    SIMATIC SCS
    Logfilename                     C:\WINDOWS\SCS_LOG.TXT
Result parameters in registry:
    Write ComponentEntry:           WinCC ACE
    Write Restart:                  0
    Write Logfilename:              C:\WINDOWS\SCS_LOG.TXT
    Write returncode first step:    1
    IScript code finished.
CA: Comp_AfterDataMove  END 14:47:42

CA: IniC_DeleteIniFiles  START 14:47:42
    Delete Ini file: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC03CDD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: IniC_DeleteIniFiles  END 14:47:42
    The temp. directory is: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC03CDD-3A54-11D6-92A8-00A0245B3AC6}\

Log File Closed (first step);;;;; 1-3-2007, 14:47:42 ;;;;;;

End CreateProcess  return=0  [14:47:42] 

================================================================================
 MSI returncode = 0   (0 = OK)
 Appresult value= 1   (is OK)
 SetupSucceeded Value= 1  (1 or 2 would be OK)
 Client entry set empty - compsetup finished.
 'setup.exe' finished.
======= Timestamp logfile end: 2007-01-03,  14:47:42
================================================================================
=================================== END ========================================
